Sensors in the surfaceCONTROL product line

The surfaceCONTROL product line was designed specifically for the inspection of diffusely reflecting surfaces, e.g. metallic surfaces (uncoated, electroplated, EPD), plastic surfaces and ceramics. The sensor based on the fringe projection principle scans the surface and generates a 3D point cloud of this surface. Therefore a sequence of structured light pattern is projected on the surface. The calibrated cameras use this pattern for searching corresponding points, from which the 3D data is calculated. Measuring areas of a few cm² up to 0.25m² are available.

Technical data

Sensor dimensions

Wolfram Schmidt

Managing Director

+49 391 / 6117 - 306

Send email

Jörg Schulze


+49 391 / 6117 - 307

Send email

INB Vision AG
Postal address:
Leipziger Str. 44
39120 Magdeburg

Delivery and visiting address:
Brenneckestr. 20
39118 Magdeburg
+49 391 / 6117 - 300
+49 391 / 6117 - 301